Category Archives: Plastic Parts

Die Casting Supervisor Job August 2023

08/10/2023 – For nearly 30 years, Kinetic Die Casting Company has been a small manufacturing company located in the Los Angeles, California area. We make aluminum die casting parts and zinc die casting parts for our manufacturing customers. We are looking to hire a Die Casting Production Supervisor. This is a full time job, 40 hours a week, for a person experienced in die casting supervision or manufacturing supervision. This person will sometimes assist with production scheduling, supervise die casting machine operators, supervise die casting machine setups, and supervise production personnel. This person should already live in Southern California to be considered. No job applicants from other countries will be considered.

Thank you. Contact us Soon
Kinetic Die Casting Company, Inc
(www.kineticdiecasting.com/)
6918 Beck Avenue
North Hollywood, CA 91605

Email Resume: sales@kineticdc.com

Call for an appointment: 818-982-9200

Open online die casting job application

#hire #job #employment #diecasting #supervisor #manufacturing

Posted in Aircraft Parts, Aluminum Die Casting, Aluminum Heatsinks, Auto Parts, Blogger, Bracket, Brass Die Casting, Business, Chocolate Fountain, Competitors, Die Casting Alloys, Die Casting Company, Die Casting Parts, Diecasting Process, Enclosures, Golf, Handle, Kinetic Die Casting Company, Lighting, newsletter, Plastic Parts, Supplier, Tooling Die Casting | Tagged , , , , , | Leave a comment

A Comparison: Die Cast Parts or Plastic Parts in 2023

A Comparison: Die Cast Parts or Plastic Parts. Within the past decade, plastic molded products have become plentiful in the market. More and more plastic products are being shaped as extra to metal products such as faucet, door knobs, and chair braces. Die casting manufacturing industry is facing an opposing that produces products that do not disintegrate or rust. However, the question is, which is actually better, Die Casting Parts or Plastic Parts?

Durability

Die cast parts are essentially stronger likened to their plastic counterparts. In cases that a material is desired to be built thin and yet tough, die cast parts are desirable. Also, die casting parts can endure a wider range of temperature than their plastic counterparts, permitting them to be more ideal in severe working environments with dangerous temperatures.

Furthermore, since, die casting manufacturers use non ferrous type of metals like aluminum, zinc and magnesium, the quarrel that die cast parts are most probable to corrode easily lacking out of the picture.

Environmental Issue

When it comes to issues with environment, plastic products do not promise very well. If you wonder how long plastic products biodegrade, then the answer is: it takes at least few hundred years. This suggests that old and non-practical plastic products are going to flood the landfills. Likening these plastic products to die cast parts, the latter is really made of recycled material. About ninety five percent of metal utilized in die cast parts production is recycled from recovered parts. With this, metal is established to be a more maintainable material that could be used not only once but countless times over.

“The Parts We Make Today, We Ship Today”

Kinetic Die Casting Company. Inc.

6918 Beck Avenue, North Hollywood,

California 91605, United States of America

E-mail sales@kineticdc.com

USA Toll Free: (800) 524-8083 Local: (818) 982-9200

To get prices for Die Casting Tooling Molds or Parts:

RFQ Die Casting Tooling Part Prices

Kinetic Die Casting Company makes:

  • NADCA-Product-Standards-for-Die-Casting-pdf
  • Die Casting Porosity
  • Die Casting Draft Angle
  • NADCA North American Die Casting Association

    Posted in Blogger, Plastic Parts | Tagged , , , , | Leave a comment

    Die Cast Manager Job

    Kinetic Die Casting Company, Inc. has a position available for a Die Casting Manager Job. This person will supervise production processes, housekeeping, enforce our safety policies and plant rules for the Die Cast department. Job duties may include supervising or personally setting controls, operating or training use of die casting machines, maintaining production equipment, troubleshooting, and repairing the die casting machines, furnace and other related equipment in the Die Cast Department.

    Five 5 years or more of aluminum die cast or plastic mold injection molding experience preferred. We prefer experience as a Die Casting Machine Operator, Die Cast Setup Man, Leadman or Foreman. You must have at least a minimum of two years of experience working in a die-casting company or plastic injection molding company. Forklift experience is a plus. Pay or Salary is negotiable, based on experience.

    Use our online Die Casting Job Application
    https://www.kineticdiecasting.com/application.php

    Come by or Email or Mail your job resume and salary or pay requirements to:

    Kinetic Die Casting Company, Inc.
    6918 Beck Avenue
    North Hollywood, California 91605
    Sales@kineticdc.com 818-982-9200

    #DieCastingJobs https://www.kineticdiecasting.com/employment.html

    #Job #Jobs #employment #diecasting #diecast #manager #supervisor

    Posted in Blogger, Business, Competitors, Die Casting Company, Diecasting Process, Kinetic Die Casting Company, newsletter, Plastic Parts, Supplier | Tagged , , , , | 1 Comment

    The Advantages of Aluminum Hardware Brackets over Plastic

    Advantages of Aluminum Hardware Brackets over Plastic:


    • Plastic is an insulator, while aluminum is electrically conductive. Plastic will need a special coating to achieve a similar result with aluminum (albeit inferior).
    • Plastic does not ground, thus it requires extra grounding metal straps. Aluminum, being a metal, is easily grounded.
    • Aluminum has a natural shield against RF and EMI, preventing radio frequency. Plastic does not block radio frequency.
    • Aluminum brackets are much stronger than plastic injection moldings.
    • Aluminum metal is stiff, while plastic injection moldings are too elastic for numerous applications.
    • Plastic molded parts do not do well for chrome plating.
    • Plastic can not obstruct electromagnetic emissions.
    • Plastic does not do well with many coatings, while aluminum brackets do better on the department.
    • Aluminum parts are stable, whereas plastic injection parts are not quite dimensionally stable.
    • Plastic molded parts do not do well in conditions of hot and humid temperatures. Aluminum hardware is more heat resistant.
    • One big problem with plastic is that they are not recyclable. Only less than 3% of the plastic will be recyclable. Nearly all metals, aluminum die castings in particular, are always readily recyclable.
    • Aluminum die castings are non-hazardous and pose no problems to the government.

      Kinetic Die Casting manufactures products like heatsink die casting, aluminum housings, and lighting fixtures. If you would like more information, please visit our website:Kinetic Die Casting Company

      Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
      E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200
      To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices

      The Parts We Make Today, We Ship Today”

      Kinetic Die Casting Company makes:
      Die Casting Manufacturing
      American National Die Casting Parts
      Die Casting Business
      Zinc Die Casting Company Blog
      Aluminum Die Casting Music Part
    Posted in Blogger, Bracket, Die Casting Parts, Handle, newsletter, Plastic Parts | Tagged , , , , , , , , , , | Leave a comment

    The Advantage of Aluminum Lighting Parts over Plastic in 2021

    The advantages of Aluminum Lighting Parts over plastic. With the invention of plastic, a lot of materials are being replaced for it. From wood to metal, each and every kind of instrument has a plastic equivalent. Because of the cost of wooden cabinets and shelves, there are now plastic equivalents. There are also plastic versions of instruments like flutes, harmonicas, etc. Toys are mostly plastic because they can easily be sanitized. They stay clean and do not rot like wood or rust like metal. However, for some, metal is still preferable and necessary.

    For lighting parts, some may see that aluminum has advantages over plastic. Of course, not all metals will be better than plastic. There are some that are really inferior and will not compare to plastic in any way. However, a premium metal like aluminum will fair well against plastic.

    For starters, plastic is sturdy and aluminum is too. It is actually stronger than plastic. Next, plastic does not rot. Aluminum, out of all the other metals, rust rarely because of its special properties. The advantages of Aluminum Lighting Parts over plastic are more on the aspect of the environment. Both are non-biodegradable and are recyclable. However, plastic is expensive and difficult to recycle. It may also produce noxious gases when recycled. Aluminum recycling is widespread and has helped reduce the amount of aluminum waste in the planet. This is why aluminum lighting parts may be better than plastic.

    To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.

    Kinetic Die Casting is a california die casting company that manufactures die cast parts. If you would like more information or request a quote, vist our website:Kinetic Die Casting Company

    Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
    E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200
    To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices

    The Parts We Make Today, We Ship Today”

    Kinetic Die Casting Company makes:
    Die Casting Manufacturing
    American National Die Casting Parts
    Die Casting Business
    Zinc Die Casting Company Blog
    Aluminum Die Casting Music Part

    Posted in Die Casting Parts, Plastic Parts | Tagged , , , , | Leave a comment