Oct 102019
 

Kinetic Die Casting Company Makes Aluminum Aircraft Parts. Kinetic Die Casting Company is an excellent American Die Casting Company that creates aluminum parts used by the United States Government as military parts. The military parts are often used by most of the divisions of American military in different contracts. The company’s clients purchase aluminum die casting parts and create finished military merchandise. The company’s specialty is to manufacture these military parts in less than one month of receiving the order of purchase. The company transport small amounts of less than a thousand military parts in as early as fourteen days, even earlier at times. They would also create and transport less than a hundred military parts if they are required to do so.

Die casting under high pressure is a procedure that the company uses to create aluminum die cast parts. They instill aluminum alloy metal that is being molten under high pressure to a steel die to manufacture aluminum parts.

The Kinetic Die Casting Company will:

May 232019
 

Kinetic Die Casting Company makes several types of Die Casting Aerospace Parts. These aerospace die casting parts are used for many types of purposes. Some of these parts are used on many types of aircraft, such as: airplanes, jet planes or helicopters.

Aircraft manufacturers typically specify aluminum die casting to make the aerospace parts because aluminum is lightweight and inexpensive as well as very strong.

  • Lightweight – Aluminum weighs only .098 pounds each cubic inch of material as compared to zinc which weighs about 2.44 pounds each cubic Inch.
  • Inexpensive – Aluminum is the third most common element on earth, so it is more available than other materials. Aluminum is used in over 80% of all die castings produced in the world.
  • Strong – Aluminum parts can be geometrically designed to be stronger than steel. Look up “aluminum is stronger than steel” on Google to see the results.

These aerospace parts range from: airplane engine piston heads, airplane distributor cap housings, fuel system parts, detention ring parts, cargo loading housings, lighting fixture parts, electronic enclosures, electronic housings, motor housings and various other aluminum die casting parts.

The companies that trust us to purchase their die casting parts from Kinetic Die Casting Company are many.

    Here are a few of the aircraft and aerospace companies that we can name:

  • Robinson Helicopter
  • Ancra International
  • Whittaker Controls
  • AAR Cargo Systems
  • Boeing Aerospace
  • Barry Controls
  • Meggitt Aerospace
  • Parker Hannifin Aerospace Corporation (Parker FSD)
  • Circle Seal Aerospace
  • Kelly Aerospace
  • Curtiss Wright
  • Honeywell
  • United Technologies Aerospace

Low Quantities.

Many of these companies order lower quantities. One of the companies listed here will order less than 50 parts at a time. Many of these companies order 250 parts or less. Kinetic Die casting will accept any purchase order quantity.

Permalink: https://www.kineticdiecasting.com/kdc/aerospace-diecastings/
Contact Kinetic Die Casting Company when you need any of the following: Low Quantities, Great Quality, Fast Delivery.

The Parts We Make Today, We Ship Today”

Aluminum Heat Sinks
Die Casting Car Parts
Aluminum Hardware Brackets
Aerospace Die Casting Parts
Military Die Casting Parts

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877

Mar 142019
 

Where Are Aluminum Airplane Parts Used? The popular aircraft airframe has been the most challenging function for aluminum alloys; to account the progress of the high strength alloys is as well to account the progress of air frames. Duralumin is the first high strength, high temperature treatable aluminum alloy and was utilized originally for the structure of stiff airships. Duralumin was actually an aluminum-copper-magnesium alloy. It was initiated in the country of Germany and expanded in the United States of America as alloy 17S-T. It was employed first and foremost as a sheet and plate.

As the 20th century evolved, aluminum turned out to be an important metal in aircraft parts. The cylinder mass of the engine that controlled the plane of the famous Wright brothers at Kitty Hawk in 1903 was a one piece die casting in an aluminum alloy consisting of 8% copper. The aluminum propeller blades emerged as early as 1907 and aluminum seats, covers, cast brackets, cowlings, and comparable parts were regular by the start of the World War I.

In the year 1916, L. Brequet created a scouting bomber that identified the primary utilization of aluminum in the functioning configuration of a plane. By the end of the war, Germany and the Allies used aluminum alloys intended for the constructional scaffolding of fuselage and section assemblies.

Airplane picture

Permalink: https://www.kineticdiecasting.com/kdc/aluminum-airplane-parts/

The Parts We Make Today, We Ship Today”


What is Die Casting?
Costs Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Die Casting Aluminum Parts

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877

Oct 112018
 

In 2018, Kinetic Die Casting Company makes Aluminum Aircraft Parts. Kinetic Die Casting Company is an excellent American Die Casting Company that creates aluminum parts used by the United States Government as military parts. The military parts are often used by most of the divisions of American military in different contracts. The company’s clients purchase aluminum die casting parts and create finished military merchandise. The company’s specialty is to manufacture these military parts in less than one month of receiving the order of purchase. The company transport small amounts of less than a thousand military parts in as early as fourteen days, even earlier at times. They would also create and transport less than a hundred military parts if they are required to do so.

Die casting under high pressure is a procedure that the company uses to create aluminum die cast parts. They instill aluminum alloy metal that is being molten under high pressure to a steel die to manufacture aluminum parts.

The Kinetic Die Casting Company will:

  • Die cast the military parts in aluminum
  • Neatly cut the extra material
  • impregnate the castings to lessen porosity
  • Zyglo examination for flaws
  • Devise the pieces to the requirements
  • Chem-Film Alodine
  • Fully examine to Part Blueprint
  • Supply a credential of USA manufacture
  • Perform a concluding examination and then bundle and transport the military parts.

    < !0>

    The Parts We Make Today, We Ship Today”


    Kineticdc makes:
    Die Casting Parts
    Aluminum Heat Sinks
    Aluminum Boxes Diecastings
    Automotive Die Casting Parts
    Die Casting Bracket Hardware
    Airplane Die Casting Parts
    Light Fixture Die Casting Parts
    Die Casting Aluminum Parts
    Aerospace Die Casting Parts
    Die Casting Part Prices
    Military Die Casting Parts
    Die Casting Tooling

    Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
    E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877

    Permalink: https://www.kineticdiecasting.com/kdc/aircraft-die-castings-2018/

  • Aug 022018
     

    The Advantages of Aluminum Aircraft Parts over Plastic. On comparing aluminum die cast parts with plastic parts in terms of ability to recycle:

    Plastic: Dilemmas concerning the plastic product’s ability to recycle came up by a nationwide task force, which called for plastics dealers abstain from using the worldwide symbol for recycling in ads, because it was considered as ambiguous in relation to plastics.

    Aluminum: Almost all metals have constantly been readily recyclable. Die castings are never dangerous wastes and they never cause problems in management or reprocessing.

      Plastic Parts:

    • Plastic is more fragile than aluminum parts.
    • Plastic is too bendable for a lot of purposes.
    • Plastic is not dimensionally firm enough.
    • Plastic does not normally perform well in warm conditions.
    • Plastic does not act well with a lot of coatings.
    • Plastic injection moldings do not obstruct radio frequency.
    • Plastic does not obstruct electromagnetic discharge.
    • Plastic injection moulded parts do not provide themselves simply for chrome plating.
      Die Cast Aluminum Parts:
    • Die Cast Parts have higher level durability under weight than plastics.
    • Die Cast Parts are totally defiant to ultra-violet rays.
    • Die Cast Parts are totally defiant to riding out.
    • Die Cast Parts are totally defiant to breaking in the incidence of diverse reagents.
    • Manufacturing phases for creating die cast parts are much quicker than for injection molded parts.

    Aluminum Aircraft Parts

    To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote. Kinetic Die Casting manufactures die casting metal parts creating products like roofing tile molds, lighting parts, and military parts. If you would like more information about Kinetic Die Casting, visit our website:Kinetic Die Casting Company

    The Parts We Make Today, We Ship Today”


    What is Die Casting?
    Costs Die Casting Parts
    Airplane Die Casting Parts
    Light Fixture Die Casting Parts
    Die Casting Aluminum Parts
    Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
    E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
    Permalink: https://www.kineticdiecasting.com/kdc/airplane-parts-in-plastic-or-aluminum