Tag Archives: Lighting Parts

Aluminum Lighting Fixtures to Lighten up Your Home in 2022

Aluminum Lighting Fixtures

Aluminum Lighting Fixtures to Lighten up Your Home. Lighting fixtures are primarily for creating artificial illumination. A lighting fixture consists of the light source, an opening that could either have lenses or none, a light reflector that controls the light and directs it towards a certain point, an electrical counterweight, a light housing for protective purposes, and a cable connecting to the power source. Lighting fixtures can be classified as either outdoor or indoor lighting fixtures.

Prior to the introduction of die casting, parts used in lighting purposes were made by welding parts together. This process was impractical; it was slow, expensive, and labor extensive. Today however, lighting fixtures are produced through die casting, a process which involves the pressurizing of molten metals into mold cavities, which is followed by a cooling process. Die casting is extremely advantageous if your objective is to manufacture substantial amounts of small to medium-sized lighting parts with excellent details and features.



Die Casting Metal Flow Video.

Aluminum, a strong, lightweight metal, is the widely-used metal for die cast lighting parts because of its sturdiness, electrical conductivity and good thermal properties. The production of aluminum die castings is also better than with other metals because the former could be produced in net shape, doing away with welding.

Die cast aluminum lighting fixtures are used extensively in the lighting components found in parking garages and medical offices. These are also incorporated in street traffic lights, outdoor lights, wall lighting fixtures and bullet lighting fixtures. Aluminum lighting fixtures are also used for aerospace lighting, medical lighting, automobile lighting and marine lighting.

Kinetic Die Casting is a Los Angeles die casting company that manufactures aluminum and zinc parts. If you would like more information, please visit our website:Kinetic Die Casting Company

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices

The Parts We Make Today, We Ship Today”

Kinetic Die Casting Company makes:
Die Casting Quality Standards
Die Casting Porosity
Die Casting Draft Angle
Die Cast Parts Company

Aluminum Die Casting Enclosure Box

Posted in Blogger, Die Casting Alloys, Die Casting Parts, Diecasting Process, Lighting, newsletter | Tagged , , , | Leave a comment

All You Need to Know about Aluminum Lighting Fixtures 2021

All You Need to Know about Aluminum Lighting Fixtures! Prior to the invention of aluminum die casting, most lighting fixtures have been exposed to welding techniques so as to produce the essential parts to this type of electrical component. Not only does this system provide an expensive and prolonged process of making just a few outputs, welding also require a lot of hands to work, necessitating a huge amount of labor. With this limitation in the widespread need for lighting fixtures to be made in different dimensions and specific designs, the science of die casting has also incorporated the production of aluminum lighting fixtures.

Aluminum lighting fixtures, as with all other products of aluminum die casting, are made with net shape. In the process of making aluminum lighting fixtures, die caster do not need to perform heavy welding, and can simply mold dies to produce the best lighting fixture in accordance to the requests of their clients. One of the best things about lighting fixtures made from aluminum is that it upholds thermal properties, thereby making it easier for a lot of household equipment and electronic gadgets to diffuse heat. Shipping costs wouldn’t also be a problem for most die casting clients as the material used is guaranteed to be lightweight. Most of the lighting fixtures before used to be made with plastic, however are found not to last long when compared to the longevity of those made from aluminum. The electrically conductive components of these fixtures also compliment the main functions of the outputs made from aluminum die casting.

Die Casting Light Fixture Parts
Light Fixture Die Casting Parts

Kinetic Die Casting Company makes aluminum die castings as Lighting Fixture Die Castings. We make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices https://www.kineticdiecasting.com/replyform.html.

Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com

Lighting Die Casting Parts
Die Casting Lighting Parts
Diecasting Parts
Die Casting Lighting Part Pictures
Die Casting Lighting Fixtures

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Lighting Parts Prices

Posted in Aluminum Die Casting, Blogger, Lighting, newsletter | Tagged , , , , , , | Leave a comment

Making Aluminum Lighting Fixtures Faster in 2021

Aluminum Lighting Fixtures

Making Aluminum Lighting Fixtures Fast. Die casting is known as a cheap process of turning metal into the needed product of the manufacturer. In other words, it turns the raw material into a part which the manufacturer needs in order to complete its product. The metal commonly used with this process is aluminum, however other metal alloys such as zinc and copper can also be used. This is the preferred process of house builders when it comes to making Aluminum Lighting Fixtures.

Lighting fixtures are integral in houses, buildings and other man made structures. Its purpose is to illuminate or provide artificial lighting inside these structures when natural lighting cannot do so. At the same time, lighting fixtures can also be used outdoors. In making these products, aluminum is a common material used because it is very strong and sturdy. At the same time, it is light and cheap. Most Aluminum Lighting Fixtures are used in street traffic casings, outdoor coach lights, parking garage lighting and medical offices which use hanging lights among others. Die casting is the preferred process because it is fast and cheap as well.

The first step in die casting is to liquefy the aluminum. This is accomplished by heating it and once it turns into liquid, it can be placed inside molds known as castings. These castings will then shape the liquid into the needed part. The mold is then cooled down slowly. Once the molds cool and are opened, the Die Casting Aluminum Lighting Fixtures are done. High quality lighting fixtures are made through this process.

Kinetic Die Casting is a aluminum and zinc die casting company. If you would like to know more information, please visit our website:Kinetic Die Casting Company

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices

The Parts We Make Today, We Ship Today”

Kinetic Die Casting Company makes:
Zinc Die Casting Parts
American Die Casting Company
Die Casting Prices or Sand Casting Parts
SuperJob For You

Zinc Die Casting Part

Posted in Die Casting Parts, Lighting | Tagged , , , , , , , | Leave a comment

Lighting Endcaps in 2021

In September 2008, we looked a Lighting Endcaps for the entertainment industry. Lighting endcaps are typically used to enclose the end of a light fixture. In this case our customer needed sets of a left endcap and a right endcap. This project required only 500 sets of parts each year. The engineer was unsure if Aluminum Die Casting was the answer to her dilemma. Many people were telling her that the minimum run for die castings was 1000’s not 100’s each year.

We looked at her project and told her, it fit in our niche of:

  • Low Quantity Parts and Fast Delivery
  • She placed the order with us in October 2008 for two cavity mold, die casting tooling, and for 200 sets of parts. She was in a hurry so she then asked if we would provide a few sets of parts she needed for an up-coming design show using SLA. Instead we gave her sample units in less than the 12 weeks we promised. She used our samples at the show. This saved her $2,000 in custom metal parts prototype part costs.

    Kinetic Die Casting does this all the time for new customers. We accept orders and deliver the aluminum parts early. We specialize in delivering faster and better quality than many customers are getting from our competitors from here locally or from far away lands.

    Kinetic Die Casting manufactures a lot of aluminum rooftile plates , trim tile molds, and military die casting. If you would like a quote, please visit our website: Kinetic Die Casting Company

    Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
    E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200
    To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices

    The Parts We Make Today, We Ship Today”

    Kinetic Die Casting Company makes:
    Die Casting Quality Standards
    Die Casting Porosity
    Die Casting Draft Angle
    Die Cast Parts Company
    Aluminum Die Casting Enclosure Box

    Posted in Die Casting Parts, Lighting | Tagged , , , , , | Leave a comment

    Brass Die Casting Lighting Fixtures are a Good Choice 2020

    Why Brass Die Casting Lighting Fixtures are a Good Choice. There are two very common techniques used in making lighting fixtures out of brass – sheet lighting fixtures and brass die casting lighting fixtures. In the case of sheet brass fixtures, they are created by taking sheets of solid brass then bending the brass sheets into the desired shapes. This can be accomplished by making use of a high-pressure machine press. The machine press will stamp the brass sheets into their molded shapes. In comparison to die cast brass, sheet brass is much thinner. It is however more economical.

    Brass die casting lighting fixtures on the other hand, make use of molds. Liquid brass will be poured into these molds to form the lighting fixtures. Most manufacturers and suppliers prefer die cast molds because of their quality and durability. For parts and fixtures that require consistent fits, efficient finishes and tight tolerances, brass die casting is well preferred. A method called sand casting is often used as an alternative to die casting. In this method a temporary mold made from packed sand is used. Brass is poured into the sand mold and when the brass hardens, the sand mold is broken away. This however does not come close to the efficiency and preciseness of die cast molds.

    Brass die casting lighting fixtures speak of nothing but quality, durability and longevity. Even under rugged, humid or corrosive outdoor environments, brass lighting fixtures will last a lifetime. Furthermore, when it comes to aesthetic beauty, nothing can compare to the classic and stylish appearance of brass.

    To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.




    Kinetic Die Casting Company


    Kinetic Die Casting manufactures custom metal parts to their customer. If you would like more information about Kinetic Die Casting, please visit our website:Kinetic Die Casting Company

    Lighting Die Casting Parts
    Die Casting Lighting Parts
    Diecasting Parts
    Die Casting Lighting Part Pictures
    Die Casting Lighting Fixtures

    Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
    E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
    Die Casting Lighting Parts Prices

    Posted in Blogger, Brass Die Casting, Lighting, newsletter | Tagged , , , | 2 Comments