May 302019
 

#Kineticdc #diecasting Logo

Kinetic Die Casting Company (www.kineticdc.com) uses metal flow software to check die casting tooling metal flow into a die casting mold making two cavities of a Heat Sink Part
(Metal Flow into Mold or Die Casting Tooling).
This is an Aluminum Heat Sink Die Casting Part for the lighting industry.

Permalink: https://www.kineticdiecasting.com/kdc/heatsink-metal-flow-video/

Two cavity aluminum heat sink die casting molds. This 5 seconds of video happens in a small fraction of a second as the metal is injected under extreme pressure. The metal flows very rapidly into a die casting mold using 2,000 pounds per square inch of hydraulic pressure that is accelerated in high shot assisted by 700 pounds of high pressure nitrogen gas inside a die casting machine.
818-982-9200 (music provided by YouTube)

Kinetic Die Casting Company
E-mail sales@kineticdc.com / 818-982-9200 / 800-524-8083 Toll Free / 818-982-0877 Fax
6918 Beck Avenue, North Hollywood, California USA 91605,
Kineticdc makes: Die Casting Parts Aluminum Heat Sinks

Feb 072019
 


Die Casting Lighting Fixtures
. In any house, building and other man made structure that is covered or in the dark, it will need artificial lighting so that it becomes hospitable and safe. Both outdoor and indoor lighting is essential in any place where people reside because people rely on light to get things done. For those which don’t receive any natural lighting, Aluminum Lighting Fixtures are the solution to this problem. Most, if not all housing and buildings make use of this feature and aluminum is a great choice for this because it is light in weight so that it can easily be installed or replaced and at the same time, it is durable so it will last longer.

Of course, Aluminum Lighting Fixtures should be made in vast quantities at a time because structures, especially buildings, would require a lot of these artificial lighting equipment. To achieve this, the best method in creating lighting fixtures is with die casting. This process can turn the aluminum into the finished product in no time as the metal is melted and using molds and castings, can be structured into the proper shapes and sizes.

When it comes to Aluminum Lighting Fixtures, die casting is the cheapest, most reliable way to achieve high quality results. And since this method makes use of the same mold, the resulting products are always consistent when it comes to the dimensions and the quality. Fast and efficient, die casting has become very popular not only with making Aluminum Lighting Fixtures, but with other parts as well.

Permalink: https://www.kineticdiecasting.com/kdc/die-casting-lighting-fixtures/

The Parts We Make Today, We Ship Today”


Kineticdc makes:
What Are Die Casting Parts
How Much Are Die Casting Part Prices
What Is Die Casting Tooling

Die Casting Part Prices

Die Casting Prices

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877

Jul 192018
 

Creating artificial light and setting the mood are the purposes of modern day lighting fixtures. Many lighting fixture parts are manufactured by die casting, a manufacturing process in which molten metal is forced into mold cavities. Die casting is beneficial if you are producing large quantities of small to medium sized lighting parts with good details,

Aluminum is lightweight and sturdy, a material often used to make lighting parts because of its durability and good thermal and electrical properties. Die cast aluminum lighting parts are made faster because they can be produced in net shape, meaning there are no welding or drilling methods needed after. Holes can be added to the mold cavities. These holes are necessary for the installation of covers or lids.

Lighting fixtures can be classified as indoor lighting fixtures and outdoor lighting fixtures. Die casting aluminum lighting parts are used in medical offices and parking garages for lighting fixtures. They are also used for bullet lighting fixtures, street traffic lights, outdoor and wall lighting fixtures. Furthermore, there are special light parts made for Aluminum lighting fixtures used for automobile lighting, marine lighting, medical lighting, and aerospace lighting.

Permalink: https://www.kineticdiecasting.com/kdc/light-fixture-diecastings/
Light Fixture Die Castings

The Parts We Make Today, We Ship Today”


Kineticdc makes:
Aluminum Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Die Casting Aluminum Box Enclosures
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877

Jun 282018
 

The aluminum die casting manufacturing process is quite similar to permanent mold casting. Both processes start out by melting or liquefying the aluminum, that is going to be used. The melted materials will then be injected into die cast molds castings. The liquid will then take the form of the patterns in the mold castings. The molds will then be allowed to cool down to harden and once they are opened, the product is finished. The difference between die casting and permanent mold casting is that the former uses high amounts of pressure in the molds so that the material will get into every part of the cavity. This results in better quality of the products which is why die casting is chosen to make Aluminum Lighting Fixtures.

Also, Aluminum Lighting Fixtures help in illuminating man made structures such as houses, buildings, tunnels as well as the streets at night. They are an essential part of these structures and a lot of them are needed. By using the die casting process, the bulk orders for these Aluminum Lighting Fixtures are met. Not only that, quality and consistency is insured by die casting. This is a cost efficient and effective way of producing Aluminum Lighting Fixtures.

Furthermore, Aluminum is a great choice for lighting fixtures as they are strong and can last a very long time. They are also very lightweight compared to other metals. Since they can be harvested almost anywhere, they are very cheap too.

Die Casting Light Fixture Parts
Light Fixture Die Casting Parts

Kinetic Die Casting Company makes aluminum die castings as Lighting Fixture Die Castings. We make these parts every day and ship thousands of these aluminum die castings every week.
Contact us to get die casting prices http://www.kineticdiecasting.com/replyform.html.

Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, California 91605
Sales@kineticdc.com

Feb 082018
 

The main purpose of lighting fixtures or parts is to create artificial light. A lighting fixture consist of the light source, light reflector that directs the light to a certain point, an opening (with lens or without lenses), the light housing for protection, an electrical counterweight, and a cord connecting to the power source. Lighting fixtures can be classified as indoor lighting fixtures and outdoor lighting fixtures.

Before the introduction to an aluminum die casting company, lighting parts are made by welding pieces together. This process is costly, time consuming, and labor extensive. Nowadays, lighting parts are manufactured by die casting, a process wherein molten metal is forced into mold cavities. Die casting is beneficial if you are producing large quantities of small to medium sized lighting parts with good details,

Aluminum is lightweight and sturdy, a material often used to make lighting parts because of its durability and good thermal and electrical properties. Die cast aluminum lighting parts are made faster because they can be produced in net shape, meaning there are no welding or drilling methods needed after. Holes can be added to the mold cavities. These holes are necessary for the installation of covers or lids.

Die cast aluminum lighting parts are used in medical offices and parking garages for lighting fixtures. They are also used for bullet lighting fixtures, street traffic lights, outdoor and wall lighting fixtures. Furthermore, there are special light parts made for Aluminum lighting fixtures used for automobile lighting, marine lighting, medical lighting, and aerospace lighting.

Permalink: https://www.kineticdiecasting.com/kdc/light-fixture-die-castings/

The Parts We Make Today, We Ship Today”


Kineticdc makes:
Aluminum Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Die Casting Aluminum Box Enclosures
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877