Independence Day celebrates the signing of our Declaration of Independence on July 4, 1776. The Continental Congress declared that the thirteen American colonies regarded themselves as a new nation, the United States of America, and were no longer part of …
Continue reading
Processing Motor Vehicle Die Cast Parts
Processing Motor Vehicle Die Cast Parts. Many automotive parts companies are now using die casting. It is a metal-working procedure which is intended for large scale productions. Motor vehicle die cast parts are known for ease in production and performance against multi-directional stresses. These parts are used as stationary parts like the vehicle frame and engine fixtures. They are also intended for mechanical parts like gears, engines and chains.
Die casting and its variants always compress molten or semi-molten metals. Hence, pressure and temperature are always important factors. As for motor vehicle die cast parts, they are usually created through cold chamber die casting. The type of casting depends on the type of metal. Majority of metal products in the automotive industry utilize aluminum and magnesium. Cold chamber method is the one appropriate for such high-melting point metals.
The metal is melted in a separate furnace. As it is cooling down, it will be transported to the dies, which contain the target shape. Depending on the strength specifications and type of metal, pressures between 10 to 175 mPa will be maintained until the metal solidifies. This can produce a wide range of shapes from the simple to the intricate: rods, bars, billets, planes and fixtures. They require little or no post machining because die casting results in precise shapes and thickness.
Motor vehicle die cast parts include engine blocks and some gears, which are mostly made of aluminum and magnesium casts. The combination of these two metals is very tough, even when subjected to repeated load and high temperatures.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting manufactures zinc and aluminium die casting. If you would like a quote, please visit our website:Die Casting quote
Fire at Kinetic Die Casting Company
Today, January 17 2011 at 8AM, we had a fire at Kinetic Die Casting Company. Everyone was in the lunch room for a company staff meeting. We completed the discussion on “Forklift Safety” for driving, moving pallets and things not to do with a forklift. “Waste of Waiting” was the next topic, where we discussed getting our production parts quicker to our customers by not waiting for processes. We were just in the middle of a contest and discussing the 7 Wastes in manufacturing. Half of the employees had already won a soda for naming four of the seven wastes.
Suddenly someone yelled “There is a fire in the die casting area”.
Fires occur frequently enough in a die casting company, that we know what to do. We ran back to the die casting area and saw that roof was on fire above die casting production cell number two. There was an area of about three feet by three feet blazing ferociously over the production cell number two melting furnace. Three people grabbed fire extinguishers and someone turned off the gas off to the die casting furnace. There was a great deal of excitement for about 20 minutes. Our continuous safety training saved the die casting building.
After the excitement, we resumed our production improvement meeting. The goal is long term improvements to Kinetic Die Casting Company without getting side tracked by other issues.
Kinetic Die Casting utilizes die casting to manufacture parts like aluminum car parts, airplane parts, lighting parts and much, much more. If you would like to request a quote, please visit our website:Die Casting quote
Exploring the Process of High Pressure Die Casting
Exploring the Process of High Pressure Die Casting. The process of high pressure die casting is one of the fastest and cost effective methods in shaping metal products. Many manufacturing companies in the fields of automotive, aircraft and electronics use die casting as the primary metal working procedure. It produces high quality products with strong yield and fine finish. It provides strength treatment which is far better than forging, extrusion or sand casting.
The procedure involves two dies: the cover die half and the ejector die half. Between them is the mold cavity. When the dies are fitted together, the plane of intersection is called the parting line. During metal working, molten metal is forced to the mold through an opening in the cover die. This is done with very high speeds, due to the high pressure of injection. These are called “shots.” While the metal is still in liquid form, extreme pressure is applied, compressing the dies. This will be maintained until the metal solidifies.
The process of high pressure die casting is further divided into two groups: cold chamber and hot chamber processes. Basically, both employ high pressure shooting and compression of the molten metal. However, hot processes can only be used on metals with lower melting point. These include copper. Cold processes are used on high melting point metals like aluminum and magnesium. Cold processes take a relatively longer time before the shot is compressed at the dies.
In both methods, the process of high pressure die casting is consistent in producing tough products. They are highly resistant to torsional and tensional stresses, making die casting popular in multiple industries.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting is a aluminum and zinc die casting company. If you would like to know more information, please visit our website:Kinetic Die Casting Company
Die casting parts and the alloys used to make them
Die casting parts and the alloys used to make them. When undergoing die casting, the type of metal alloy used determines the specific type of die casting that should be employed and the quality by which the die casting parts are made. To give you an idea of which metal alloys to use for you to arrive at your desired casting part, take note of the advantages and disadvantages of using these metal alloys.
Zinc is the easiest alloy to cast because it is highly ductile and has high impact strength and can be easily plated. The low melting point of zinc makes it convenient to be used for small casting parts and is expected to last long.
Aluminum is a lightweight alloy that contains a high stability to be molded into complicated shapes and sizes. It is known to be very resistant to corrosion and it is noted for its chemical and physical properties such as high electrical and thermal conductivity as well as high temperature tolerance.
Magnesium is well known to be machined easily, besides being the lightest alloy to be die cast, this metal also has extraordinary strength to weight ratio.
The high hardness of Copper coupled with its high corrosion resistance provides excellent sheer stress resistance and strong dimensional stability like that of steel.
Alloys made from Lead and Tin are high density and are used for production of parts with exceptionally close dimensions.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting manufactures products like aluminum hardware, and aluminum boxes. If you would like more information on Kinetic Die Casting, please visit our website:Kinetic Die Casting Company
Examples of Die Casting
Examples of Die Casting. Dies casting is the meticulous process of forcing molten metal into a mold. It is usually done by employing high temperatures and pressures. Majority of die casters in the metalwork industry employ different kinds of die casting techniques in order to achieve a certain feature that is not readily cast-able with the mold being used and the casting being made. Other secondary operations like these include polishing, plating, buffing, tapping a hole and painting.
Other methods include the pore-free casting process which is used when the casting required no porosity. It more or less employs the process of conventional die casting except that oxygen IS utilized before each shot and injected into the die. This results in the formation of tiny dispersed oxides during filling, eventually minimizing the formation of gas bubbles and ultimately eliminating porosity. Besides the greater strength of the die produced, the product can still be heat treated and welded. The process can be used with zinc, lead and aluminum alloys.
Another method is the Heated-manifold direct-injection die casting. In this process, molten zinc is used and forced through a heated manifold. The manifold leads into a number of heated mini-nozzles which all end into a molding cavity. This process is employed because of its lower cost per part, by virtue of scrap-reduction, energy conservation, and improved surface quality that is made possible by slower cooling cycles.
To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.
Kinetic Die Casting is a california die casting companycalifornia die casting company that manufactures die cast parts. If you would like more information or request a quote, visit our website:Kinetic Die Casting Company
Posted in Diecasting Process
Tagged aluminum, Aluminum Die Casting, Aluminum Die Casting Company, aluminum parts
4 Comments
