Die Casting Tooling an industrial process. Die casting is an industrial process used by manufacturers which involves forcing melted metal into Die Casting Tooling or also known as molds under extremely high pressure. This process is commonly used in cases where a manufacturer would need a large quantity of small sized or medium sized parts. This process can make use of ferrous metals but it usually uses non ferrous materials such as copper, zinc, aluminum and magnesium among other metals. Die casting is a great process to use where the manufacturer needs to maintain smooth surface, good quality of parts and a fairly uniform out come for each part. There is little or sometimes no need for post production machining to uniform the die cast parts.
There are two ways to achieve this process; first is to use hot chambered machine and the second is to use cold chambered machine. The former is used for metals with lower melting points and can fill in the cavities of Die Casting Tooling faster compared to the latter. However, there are metals which hot chambered machines cannot handle so cold chambered machines are used in their place.
When it comes to Die Casting Tooling, there are different sizes and shapes to choose from. There are also different styles to use and the cost will vary based on the simplicity or complexity of the mold. They are built usually from hardened steel which takes a lot of time to finish. This is the main part of the whole die casting process and is the most important part.