Tag Archives: Amplifier

Examples of Cast Aluminum Parts for Music

Examples of Cast Aluminum Parts for Music. Aluminum because of its versatility and superb quality is easily incorporated into different kinds of equipment. It is used in heavy industries and even rocket science. It has been used in almost every room of the house and the appliances and furniture that would come inside it. It has been used in cars and every other vehicle that moves on land, water or air. It has been used for quality sports equipment and the arts.

Aluminum helps both athletes and artists perform well and produce good art and music. So what are the examples of cast aluminum parts for music?

Since the world of music revolves around instruments, you can expect that you would see aluminum in these instruments. You have aluminum knobs for acoustic and electric guitars, aluminum buttons for guitar straps and aluminum compartments for most of the music instruments.

Even the oldest record players have aluminum parts. Besides instruments, aluminum plays an important part in serving as stands and trusses. Music stands for musical sheets are often made in aluminum. This is especially needed by vocalists and choirs. Also, drum sets are held up by aluminum rods and stands. Aluminum is quite sturdy and not easy to dent. It is also not that corrosive as compared to other metals. It is lighter and therefore easy to carry when you need to bring along your instruments and equipment with you.

To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.

Kinetic Die Casting manufactures die casting metal parts creating products like roofing tile molds, lighting parts, and military parts. If you would like more information about Kinetic Die Casting, visit our website:Kinetic Die Casting Company

Posted in Die Casting Parts | Tagged , , , , | Leave a comment

Examples of Cast Aluminum Parts for Music

Examples of Cast Aluminum Parts for Music. Aluminum because of its versatility and superb quality is easily incorporated into different kinds of equipment. It is used in heavy industries and even rocket science. It has been used in almost every room of the house and the appliances and furniture that would come inside it. It has been used in cars and every other vehicle that moves on land, water or air. It has been used for quality sports equipment and the arts.

Aluminum helps both athletes and artists perform well and produce good art and music. So what are the examples of cast aluminum parts for music?

Since the world of music revolves around instruments, you can expect that you would see aluminum in these instruments. You have aluminum knobs for acoustic and electric guitars, aluminum buttons for guitar straps and aluminum compartments for most of the music instruments.

Even the oldest record players have aluminum parts. Besides instruments, aluminum plays an important part in serving as stands and trusses. Music stands for musical sheets are often made in aluminum. This is especially needed by vocalists and choirs. Also, drum sets are held up by aluminum rods and stands. Aluminum is quite sturdy and not easy to dent. It is also not that corrosive as compared to other metals. It is lighter and therefore easy to carry when you need to bring along your instruments and equipment with you.

Kinetic Die Casting Company – To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.

Kinetic Die Casting manufactures die cast parts for their customers. If you would like to know more about what is die casting or if you would like a quote, please visit our website:Kinetic Die Casting Company

Posted in Diecasting Process | Tagged , , | Leave a comment

How are Cast Aluminum Parts for Music made?

How are Cast Aluminum Parts for Music made? Music has been one of the oldest fields of human knowledge. Ever since civilization prospered, people have had experimented with music through different materials from nature.

Woodwind instruments were made from carved wood including bamboo or other lighter materials. String instruments were also made from wood and other plant materials for string. In other parts of the world, more complicated instruments were made from animal skins and treated wood.

Nowadays, we are able to produce different kinds and varieties of musical instruments from plastic and metal. You have flutes and brass instruments made from metal, with toy versions done in plastic. For some instruments like guitars, their bodies are made of another primary material while some of their accents and knobs are made of aluminum.

Aluminum parts are popular for most fields because of its lightweight and flexible characteristics. So How are Cast Aluminum Amplifier Parts for Music made?

Aluminum parts are usually made through die casting. Die casting uses pressure and metal molds to create smooth finished aluminum fixtures without the need for welding or other treatments. Pre-heated and melted aluminum is injected into the cold chamber mold. Depending on the prescribed time, the melted aluminum is cooled and let out for final procedures.

To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.

Kinetic Die Casting manufactures aluminum die castings creating aluminum die casting boxes, aluminum handle hardware, and aerospace die casting. If you would like to get a quote, please visit our website: Kinetic Die Casting Company

Posted in Business | Tagged , , | Leave a comment

Music Uses Aluminum

Music Uses Aluminum. The use of aluminum products has become widespread. You can see aluminum everywhere and it is actually impossible to be in a place where you cannot see an aluminum part. This prevalence is due to the fact that aluminum is very durable and inexpensive. Many manufacturers prefer using aluminum in their products because it is easy to mold and inexpensive to make. Also, aluminum has chemical and thermal properties that are suitable to heat-producing equipments that can avoid malfunction and give longer lifespan for the equipments. With these reasons, even the music industry is using aluminum for the some parts of the equipments used like amplifiers, speakers, and even guitar chassis. These equipments are sensitive because of the vibrations and frequencies that they receive. This makes the aluminum so perfect for the musical equipments.

Aluminum diecastings are advantageous when it comes to aluminum musical equipment because of the weight. As compared to steel casts, aluminum parts are only one-third in weight. As we know, these equipments are frequently transported so having light weight is really a plus. Also, aluminum casts can diffuse the heat that is produced when using the equipments so they can prolong the life of these equipments. Lastly, aluminum casts are produced near net shape so joints and welded parts are rarely seen. This makes the casts stronger as compared to the steel parts that have joints and welded parts.

Kinetic Die Casting manufactures custom metal parts to their customer. If you would like more information about Kinetic Die Casting, please visit our website:Kinetic Die Casting Company

Posted in Diecasting Process | Tagged , , , | Leave a comment

The Advantages of Cast Aluminum Parts for Music over Plastic Parts

The Advantages of Cast Aluminum Parts for Music over Plastic Parts. For serious musicians and the musical professionals in the music industry, having instruments that last longer, that sound extraordinarily good, and that are strong and sturdy is very important. Guitar amplifiers, for example, should be able to produce sound as clearly and stable as they can, which is why many manufacturers of amplifiers are now going for aluminum casting for parts. Aluminum castings are normally sturdier and are able to produce sound better than plastic, plus it is easier to shape and quick to produce in numbers. Though plastic is cheaper when it comes to production costs, aluminum casting parts for music last longer, can be shaped into all kinds of complex shapes to make it fit and function better, and it isn’t expensive as well.

But because sound and how guitar amplifiers produce the kind of music certain musicians are after are some of the top priorities when choosing guitar amps, there is still the want for vacuum tube amps despite their heavy weight and constant tuning and annual maintenance. Guitarists for genres such as the blues and rock prefer the sound produced by these vacuum tube guitar amps, but thanks to the advancements in technology even today’s guitar amplifiers can emulate sound that of classic guitars almost perfectly.

Kinetic Die Casting manufactures aluminum and zinc die casting parts. Samples of KDC’s work include die cast speaker parts, aluminum tile plates, and other die cast metal parts. If you would like to have a quote please visit our website: Kinetic Die Casting Company

Posted in Die Casting Parts | Tagged , , , | Leave a comment