Kinetic Die Casting Company

6918 Beck Avenue, North Hollywood, California

Kinetic Die Casting Company needs a “Die Casting Machine Set Up Man”.

Skills Needed:

• Understand how to take die casting mold apart.
• Understand how to put die casting inserts into molds.
• Understand the basic operations of a Die Casting Machine.
• Know how to use tools for set up.
• Able to operate a forklift to move tooling.

Persons interested on this postion should call 818-982-9200 or fax applicaton and resume to 818-982-0877.

Heat Sinks prevent damage to circuits. If you open your computer processing unit, you will find a component that sits on top of your circuit board. This is the heat sink die casting and it contributes a lot in making things work more efficiently inside the machine. Aluminum heat sink die castings are important because they keep things cool to avoid any damage that may be caused by too much heat.

A die casting heat sink is a molded piece of aluminum die casting that can draw the heat away from a processor or source. It does its job by exchanging energies with the source. The process is called thermal contact. Heat sink die castings are widely used in systems or machines that require effective and efficient heat dissipation. Aluminum Die Casting Heat Sinks Keep Machines Working Efficiently.

In the case of refrigeration, there is a process involving the removal of heat from the enclosed space. This heat is rejected and shifted somewhere, and that’s where the heat sinks come in.

Heat sink die castings are very useful in the thermal management of various electronic devices and systems. Since heat is generated by the electronic devices and the circuitries, this heat must be dissipated so that the machine will stay reliable and to prevent any premature failure or damage.

Aluminum heat sink die castings are very light and have a specific gravity of about 0.10 pounds per cubic inch. Aluminum die casting has other several properties that make it a very good material for manufacturing heat sinks. For one, it is electrically conductive without being magnetic. They can be used as natural grounds for the electronic components that may be getting interferences from outside frequencies.

Aluminum shapes. Aluminum is a light metal found naturally in the earth’s crust. It is silvery grey. It is light in weight. It is not a magnetic metal. It does not sparkle but it was once considered more precious than gold. It is abundant but reactive and has to be extracted from ore.

Once extracted, this metal is useful in a wide range of industrial applications. Aluminum die cast parts are found in an unbelievable number of our day-to-day appliances and equipment. It is used in car pistons, aircraft components, marine hardware, machine tool parts, lawnmower gear and housings, streetlamp housings, lighting fixtures, typewriter frames, dental equipment, frying skillets, golfing products, guitar amps, and hardware brackets. This metal has certain properties that make it ideal for use in all kinds of metal die casting processes. The aluminum die casting process include die casting, sand casting, permanent mold casting, composite mold casting, continuous mold casting, investment die casting, centrifugal casting, plaster casting, and hot isostatic pressing.

Die casting is a way of manufacturing that enables mass production in an easy, affordable manner. It involves the use of a mold, a pattern, release agents, sealers, and die castable material. Viscous substances that can be poured into a mold are perfect for this. When the material sets or cures it takes the shape of the mold. This is how aluminum part die castings are processed. Other metals that can be shaped in this way are tin, lead, zinc, copper, and silver. Non-metals used as die castable material are concrete, plastic resins, plaster of paris, and wax.

A bracket is an L-shaped fixed structure used to connect one horizontal surface and one vertical surface. Brackets are used for both household and industrial purposes. Steel brackets are costly and heavy. The introduction of aluminum brackets made it possible to produce brackets that are lighter and less expensive.

Die cast aluminum bracket are made from molten metal forced into mold cavities. The process of die casting is perfect if you are producing large quantities of small to medium sized parts with good details. Aluminum brackets are good conductors of electricity. Aluminum brackets made by die casting are produced in a faster rate with less labor, ranging from a few hundred to a few thousand small parts daily. Aluminum brackets also have holes die cast into the mold so that no drilling is required after, saving time, energy, and money altogether. Kinetic Die Casting Company makes Aluminum Brackets.

There are many kinds of aluminum brackets: An angle bracket, uni-strut universal right angle surface bracket, and a multi-purpose servo bracket. All these are made with quality aluminum and are designed to give absolute support.

The “Seat-Back Tray-Table” of the Boeing 747-700 Airplane is supported with two die cast aluminum brackets, strong enough to hold glasses, plates, a laptop, and even the arms and hands of someone working on the make-shift table.

Aluminum brackets are also designed to be decorative. They are used for lighting fixtures, chocolate fountains, barns, and many more. Die cast aluminum brackets have become the choice of numerous builders because it is cheap, light, and sturdy.

Aluminum Enclosure Boxes and the many other uses of Aluminum. Aluminum enclosure boxes are becoming a preference for many enclosure manufacturing companies for their packaging requirements. The custom enclosure boxes are used as enclosure housings for various products like electronic enclosure components.

The usual packaging types are made of corrugated paper materials, plastic, turned edge, or wood. The aluminum enclosure is a relatively new option for packaging. The enclosure boxes can be in tote style, two-piece set up, or those similar to the CD/DVD boxes.

Aluminum Alloy is a silvery white metal that is ductile, malleable, and conductive of heat and electricity. In its pure state, this metal is soft. It becomes stronger and harder once alloyed with many other elements. Aluminum is one of the most abundant metals on earth, but it does not occur without combining with others. It can be found in many minerals like clay, bauxite, mica, feldspar, alum, and others like sapphire and ruby.

This metal is lightweight and is commonly found at home, in the kitchen specifically. Pots, pans, beverage cans, and the aluminum foil are made from aluminum. Many of its properties make it the a very good choice for a raw material in making housings or enclosures:
- Attractive
- Non-toxic
- Resistant to corrosion
- Non-magnetic
- Easy to form, cast, or process into different shapes
- Lightweight
- Electrically conductive

Aluminum alloys are commonly used in airplane enclosures, highway enclosures and road signs, bridges, storage tanks, and buildings too. Auto manufactures prefer aluminum enclosures because it is 1/3 as heavy as steel enclosures and that means lower consumption of fuel.

It is not surprising that aluminum enclosure boxes are becoming a new preference for enclosures even for smaller items because of its many beneficial properties.